-- *****************************************************************************
-- Juniper-PPPOE-PROFILE-MIB
--
-- Juniper Networks Enterprise MIB
-- Point-to-Point Protocol over Ethernet (PPPoE) Profile MIB
--
-- Copyright (c) 2001, 2002 Unisphere Networks, Inc.
-- Copyright (c) 2002-2005 Juniper Networks, Inc.
-- Copyright (c) 2008 Juniper Networks, Inc.
-- All Rights Reserved.
-- *****************************************************************************Juniper-PPPOE-PROFILE-MIB DEFINITIONS::=BEGINIMPORTSMODULE-IDENTITY,OBJECT-TYPE,Integer32,Unsigned32
FROM SNMPv2-SMI
DisplayStringFROM SNMPv2-TC
MODULE-COMPLIANCE,OBJECT-GROUPFROM SNMPv2-CONF
juniMibs
FROM Juniper-MIBs
JuniSetMap, JuniEnable
FROM Juniper-TC;juniPppoeProfileMIB MODULE-IDENTITYLAST-UPDATED"200806181029Z"-- 18-Jun-08 03:59 PM ESTORGANIZATION"Juniper Networks, Inc."CONTACT-INFO" Juniper Networks, Inc.
Postal: 10 Technology Park Drive
Westford, MA 01886-3146
USA
Tel: +1 978 589 5800
Email: mib@Juniper.net"DESCRIPTION"The point-to-point protocol over Ethernet (PPPoE) profile MIB for the
Juniper enterprise."-- Revision HistoryREVISION"200806181029Z"-- 18-Jun-08 03:59 PM EST - JUNOSe 9.3DESCRIPTION"Added juniPppoeProfileMaxSessionOverride object."REVISION"200507131140Z"-- 13-Jul-05 11:40 AM EDT - JUNOSe 7.0.1DESCRIPTION"Added MTU control object."REVISION"200406101925Z"-- 10-Jun-04 03:25 PM EDT - JUNOSe 7.0
DESCRIPTION"Added Remote Circuit Id Capture object."REVISION"200303112158Z"-- 11-Mar-03 04:58 PM EST - JUNOSe 5.1DESCRIPTION"Added Service Name Table object."REVISION"200209162144Z"-- 16-Sep-02 05:44 PM EDT - JUNOSe 5.0DESCRIPTION"Replaced Unisphere names with Juniper names."REVISION"200208152034Z"-- 15-Aug-02 04:34 PM EDT - JUNOSe 4.0DESCRIPTION"Added PADI flag and packet trace support."
REVISION"200208151907Z"-- 15-Aug-02 03:07 PM EDT - JUNOSe 3.2DESCRIPTION"Added duplicate MAC address indicator and AC-NAME tag objects."REVISION"200103211832Z"-- 21-Mar-01 01:32 PM EST - JUNOSe 3.0DESCRIPTION"Initial version of this MIB module."::={ juniMibs 46}-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Managed objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++juniPppoeProfileObjects OBJECTIDENTIFIER::={ juniPppoeProfileMIB 1}
juniPppoeProfile OBJECTIDENTIFIER::={ juniPppoeProfileObjects 1}--
-- This MIB defines configuration profile structure for PPPoE interfaces.
-- The creation/deletion of profiles and mapping of profile names to profile
-- indices is coordinated in the Juniper-PROFILE-MIB.
--
--
-- The PPPoE Profile Table
--juniPppoeProfileTable OBJECT-TYPESYNTAXSEQUENCEOF JuniPppoeProfileEntry
MAX-ACCESSnot-accessible
STATUScurrentDESCRIPTION"This table contains profiles for configuring PPPoE interfaces/sessions.
Entries in this table are created/deleted as a side-effect of
corresponding operations to the juniProfileNameTable in the
Juniper-PROFILE-MIB."::={ juniPppoeProfile 1}juniPppoeProfileEntry OBJECT-TYPESYNTAX JuniPppoeProfileEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A profile describing configuration of a PPPoE interface and its
subinterfaces (sessions)."INDEX{ juniPppoeProfileId }::={ juniPppoeProfileTable 1}
JuniPppoeProfileEntry ::=SEQUENCE{
juniPppoeProfileId Unsigned32,
juniPppoeProfileSetMap JuniSetMap,
juniPppoeProfileMaxNumSessions Integer32,
juniPppoeProfileSubMotm DisplayString,
juniPppoeProfileSubUrl DisplayString,
juniPppoeProfileDupProtect JuniEnable,
juniPppoeProfileAcName DisplayString,
juniPppoeProfilePadiFlag JuniEnable,
juniPppoeProfilePacketTrace JuniEnable,
juniPppoeProfileServiceNameTableName DisplayString,
juniPppoeProfilePadrRemoteCircuitIdCapture JuniEnable,
juniPppoeProfileMtu Integer32,
juniPppoeProfileMaxSessionOverride INTEGER}juniPppoeProfileId OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSnot-accessibleSTATUScurrent
DESCRIPTION"The integer identifier associated with this profile. A value for this
identifier is determined by locating or creating a profile name in the
juniProfileNameTable."::={ juniPppoeProfileEntry 1}juniPppoeProfileSetMap OBJECT-TYPESYNTAX JuniSetMap
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"A bitmap representing which objects in this entry have been explicitly
configured. See the definition of the JuniSetMap TEXTUAL-CONVENTION for
details of use.
The INDEX object(s) and this object are excluded from representation
(i.e. their bits are never set).
When a SET request does not explicitly configure JuniSetMap, bits in
JuniSetMap are set as a side-effect of configuring other profile
attributes in the same entry.
If, however, a SET request explicitly configures JuniSetMap, the
explicitly configured value overrides 1) any previous bit settings, and
2) any simultaneous 'side-effect' settings that would otherwise occur.
Once set, bits can only be cleared by explicitly configuring
JuniSetMap."::={ juniPppoeProfileEntry 2}--
-- PPPoE main interface parameters
--juniPppoeProfileMaxNumSessions OBJECT-TYPESYNTAXInteger32(0..65535)
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The maximum number of PPPoE sessions (subinterfaces) that can be
configured on the main PPPoE interface created using this profile. A
value of zero indicates no bound is configured."DEFVAL{0}::={ juniPppoeProfileEntry 3}--
-- Other major parameters follow the sub interface parameters
--
--
-- PPPoE subinterface parameters
--juniPppoeProfileSubMotm OBJECT-TYPESYNTAXDisplayString(SIZE(0..127))MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"A message to send via a PADM on the sub-interface when this profile is
applied to the IP interface above this PPPoE sub- interface. A client
may choose to display this message to the user."::={ juniPppoeProfileEntry 4}
juniPppoeProfileSubUrl OBJECT-TYPESYNTAXDisplayString(SIZE(0..127))MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"A URL to be sent via a PADM on the sub-interface when this profile is
applied to the IP interface above this PPPoE sub-interface. The string
entered here can have several substitutions applied:
%D is replaced with the profile name
%d is replaced with the domain name
%u is replaced with the user name
%U is replaced with the user/domain name together
%% is replaced with the % character
The resulting string must not be greater than 127 octets long. The
client may use this URL as the initial web-page for the user."::={ juniPppoeProfileEntry 5}juniPppoeProfileDupProtect OBJECT-TYPESYNTAX JuniEnable
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Flag to control whether duplicate MAC addresses are allowed"DEFVAL{ disable }::={ juniPppoeProfileEntry 6}
juniPppoeProfileAcName OBJECT-TYPESYNTAXDisplayString(SIZE(0..64))MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The name to use for the AC-NAME tag that is sent in any PADO that is
sent on this interface."::={ juniPppoeProfileEntry 7}juniPppoeProfilePadiFlag OBJECT-TYPE
SYNTAX JuniEnable
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The PPPoE major interface parameter PADI flag controls whether to
always repsond to a PADI with a PADO regardless of the ability to create
the session and allow the session establish phase to resolve it."DEFVAL{ disable }::={ juniPppoeProfileEntry 8}juniPppoeProfilePacketTrace OBJECT-TYPESYNTAX JuniEnable
MAX-ACCESSread-write
STATUScurrentDESCRIPTION"The PPPoE major interface parameter packet tracing flag controls
whether packet tracing is enable or not."DEFVAL{ disable }::={ juniPppoeProfileEntry 9}juniPppoeProfileServiceNameTableName OBJECT-TYPESYNTAXDisplayString(SIZE(0..31))MAX-ACCESSread-write
STATUScurrentDESCRIPTION"The PPPoE Service name table controls behavior of PADO control
packets."::={ juniPppoeProfileEntry 10}juniPppoeProfilePadrRemoteCircuitIdCapture OBJECT-TYPESYNTAX JuniEnable
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The PPPoE major interface parameter PADR remote circuit id capture flag
controls whether the remote circuit id string possibly contained
in the PADR packet will be saved and used by AAA to replace the NAS-PORT-ID
field."DEFVAL{ disable }::={ juniPppoeProfileEntry 11}juniPppoeProfileMtu OBJECT-TYPESYNTAXInteger32(1|2|66..65535)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The initial Maximum Transmit Unit (MTU) that the PPPoE major interface
entity will advertise to the remote entity.
If the value of this variable is 1 then the local PPPoE entity will
use an MTU value determined by its underlying media interface.
If the value of this variable is 2 then the local PPPoE entity will
use a value determined by the PPPoE Max-Mtu-Tag transmitted from the
client in the PADR packet. If no Max-Mtu-Tag is received, the value
defaults to a maximum of 1494.
The operational MTU is limited by the MTU of the underlying media
interface minus the PPPoE frame overhead."DEFVAL{1494}::={ juniPppoeProfileEntry 12}juniPppoeProfileMaxSessionOverride OBJECT-TYPE
SYNTAXINTEGER{override(1),ignore(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Configure the action to be taken by PPPoE when RADIUS server returns
the PPPoE max-session value:
override Override the current PPPoE max-session value with the
value returned by RADIUS server
Ignore Ignore the max-session value returned by RADIUS server"DEFVAL{ ignore }
::={ juniPppoeProfileEntry 13}-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Notifications
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- No notifications are defined in this MIB.-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Conformance information
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++juniPppoeProfileConformance OBJECTIDENTIFIER::={ juniPppoeProfileMIB 4}juniPppoeProfileCompliances OBJECTIDENTIFIER
::={ juniPppoeProfileConformance 1}juniPppoeProfileGroups OBJECTIDENTIFIER::={ juniPppoeProfileConformance 2}--
-- compliance statements
--juniPppoeProfileCompliance MODULE-COMPLIANCESTATUSobsoleteDESCRIPTION"Obsolete compliance statement for entities which implement the Juniper
PPPoE Profile MIB. This statement became obsolete when the duplicate
MAC address indicator and AC-NAME tag were added."
MODULE-- this moduleMANDATORY-GROUPS{
juniPppoeProfileGroup }::={ juniPppoeProfileCompliances 1}-- JUNOSe 3.0juniPppoeCompliance2 MODULE-COMPLIANCESTATUSobsoleteDESCRIPTION"Obsolete compliance statement for entities which implement the Juniper
PPPoE profile MIB. This statement became obsolete when PADI flag,
AC-name and packet trace objects were added."MODULE-- this module
MANDATORY-GROUPS{
juniPppoeProfileGroup2 }::={ juniPppoeProfileCompliances 2}-- JUNOSe 3.2juniPppoeCompliance3 MODULE-COMPLIANCESTATUSobsoleteDESCRIPTION"Obsolete compliance statement for entities which implement the Juniper
PPPoE profile MIB. This statement became obsolete when the service
name table was added."MODULE-- this moduleMANDATORY-GROUPS{
juniPppoeProfileGroup3 }::={ juniPppoeProfileCompliances 3}-- JUNOSe 4.0juniPppoeCompliance4 MODULE-COMPLIANCESTATUSobsoleteDESCRIPTION"Obsolete compliance statement for entities which implement the Juniper
PPPoE profile MIB. This statement became obsolete when the remote
circuit id capture was added."MODULE-- this moduleMANDATORY-GROUPS{
juniPppoeProfileGroup4 }::={ juniPppoeProfileCompliances 4}-- JUNOSe 5.1
juniPppoeCompliance5 MODULE-COMPLIANCESTATUSobsoleteDESCRIPTION"Obsolete compliance statement for entities which implement the Juniper
PPPoE MIB. This statement became obsolete when support was added for
MTU configuration."MODULE-- this moduleMANDATORY-GROUPS{
juniPppoeProfileGroup5 }::={ juniPppoeProfileCompliances 5}-- JUNOSe 7.0
juniPppoeCompliance6 MODULE-COMPLIANCESTATUSobsoleteDESCRIPTION"Obsolete compliance statement for entities which implement the Juniper
PPPoE MIB. This statement became obsolete when support was added for
juniPppoeProfileMaxSessionOverride."MODULE-- this moduleMANDATORY-GROUPS{
juniPppoeProfileGroup6 }::={ juniPppoeProfileCompliances 6}-- JUNOSe 7.1juniPppoeCompliance7 MODULE-COMPLIANCE
STATUScurrentDESCRIPTION"The compliance statement for entities which implement the Juniper PPPoE
Profile MIB."MODULE-- this moduleMANDATORY-GROUPS{
juniPppoeProfileGroup7 }::={ juniPppoeProfileCompliances 7}-- JUNOSe 9.3--
-- units of conformance
--juniPppoeProfileGroup OBJECT-GROUPOBJECTS{
juniPppoeProfileSetMap,
juniPppoeProfileMaxNumSessions,
juniPppoeProfileSubMotm,
juniPppoeProfileSubUrl }STATUSobsoleteDESCRIPTION"Obsolete collection of objects providing management of profile
functionality for PPPoE interfaces in a Juniper product. This group
became obsolete when the duplicate MAC address indicator and AC-NAME tag
objects were added."::={ juniPppoeProfileGroups 1}juniPppoeProfileGroup2 OBJECT-GROUPOBJECTS{
juniPppoeProfileSetMap,
juniPppoeProfileMaxNumSessions,
juniPppoeProfileSubMotm,
juniPppoeProfileSubUrl,
juniPppoeProfileDupProtect,
juniPppoeProfileAcName }STATUSobsoleteDESCRIPTION"Obsolete collection of objects providing management of profile
functionality for PPPOE interfaces in a Juniper product. This group
became obsolete when PADI flag, AC-name and packet trace objects were
added."::={ juniPppoeProfileGroups 2}juniPppoeProfileGroup3 OBJECT-GROUP
OBJECTS{
juniPppoeProfileSetMap,
juniPppoeProfileMaxNumSessions,
juniPppoeProfileSubMotm,
juniPppoeProfileSubUrl,
juniPppoeProfileDupProtect,
juniPppoeProfileAcName,
juniPppoeProfilePadiFlag,
juniPppoeProfilePacketTrace }STATUSobsoleteDESCRIPTION"A collection of objects providing management of profile functionality
for PPPOE interfaces in a Juniper product."::={ juniPppoeProfileGroups 3}
juniPppoeProfileGroup4 OBJECT-GROUPOBJECTS{
juniPppoeProfileSetMap,
juniPppoeProfileMaxNumSessions,
juniPppoeProfileSubMotm,
juniPppoeProfileSubUrl,
juniPppoeProfileDupProtect,
juniPppoeProfileAcName,
juniPppoeProfilePadiFlag,
juniPppoeProfilePacketTrace,
juniPppoeProfileServiceNameTableName }STATUSobsoleteDESCRIPTION"A collection of objects providing management of profile functionality
for PPPOE interfaces in a Juniper product."::={ juniPppoeProfileGroups 4}juniPppoeProfileGroup5 OBJECT-GROUPOBJECTS{
juniPppoeProfileSetMap,
juniPppoeProfileMaxNumSessions,
juniPppoeProfileSubMotm,
juniPppoeProfileSubUrl,
juniPppoeProfileDupProtect,
juniPppoeProfileAcName,
juniPppoeProfilePadiFlag,
juniPppoeProfilePacketTrace,
juniPppoeProfileServiceNameTableName,
juniPppoeProfilePadrRemoteCircuitIdCapture }
STATUSobsoleteDESCRIPTION"A collection of objects providing management of profile functionality
for PPPOE interfaces in a Juniper product."::={ juniPppoeProfileGroups 5}juniPppoeProfileGroup6 OBJECT-GROUPOBJECTS{
juniPppoeProfileSetMap,
juniPppoeProfileMaxNumSessions,
juniPppoeProfileSubMotm,
juniPppoeProfileSubUrl,
juniPppoeProfileDupProtect,
juniPppoeProfileAcName,
juniPppoeProfilePadiFlag,
juniPppoeProfilePacketTrace,
juniPppoeProfileServiceNameTableName,
juniPppoeProfilePadrRemoteCircuitIdCapture,
juniPppoeProfileMtu }STATUSobsoleteDESCRIPTION"A collection of objects providing management of profile functionality
for PPPOE interfaces in a Juniper product."::={ juniPppoeProfileGroups 6}juniPppoeProfileGroup7 OBJECT-GROUPOBJECTS{
juniPppoeProfileSetMap,
juniPppoeProfileMaxNumSessions,
juniPppoeProfileSubMotm,
juniPppoeProfileSubUrl,
juniPppoeProfileDupProtect,
juniPppoeProfileAcName,
juniPppoeProfilePadiFlag,
juniPppoeProfilePacketTrace,
juniPppoeProfileServiceNameTableName,
juniPppoeProfilePadrRemoteCircuitIdCapture,
juniPppoeProfileMtu,
juniPppoeProfileMaxSessionOverride }STATUScurrentDESCRIPTION"A collection of objects providing management of profile functionality
for PPPOE interfaces in a Juniper product."::={ juniPppoeProfileGroups 7}END